Flintec KPF-10 User Manual

Junction Box Type KPF-4 / KPF-6 / KPF-8 / KPF-10 TTEECCHHNNIICCAALL MMAANNUUAALL Flintec GmbH Bemannsbruch 9 74909 Meckeshe

RIGHTS AND LIABILITIES All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form

TABLE OF CONTENTS RIGHTS AND LIABILITIES...

INTRODUCTION AND TECHNICAL DATA The Polyester junction box is designed for the parallel connection of load cells. There are 4 different types: Type

LOAD CELL CABLE CONNECTION Only the cable gland nut (see (1) in fig.1) must be loosened. The bottom part of the cable gland must remain tightened. It

CORNER CORRECTION AT SCALES WITH FLINTEC LOAD CELLS Flintec load cells are manufactured with rather tight tolerances, so in most cases an additional c

SUMMARY OF IMPORTANT SERVICE HINTS At each re-calibration or repair following checks or actions have to be done: 1. All bottom parts of the cable gl

SERVICE MATERIAL Service kit no.1 Article no.: 5200-U1 for load cells with maximum capacity above 30 t with ring spanner Parts list: Description A